Karcher IP 120 Manual do Utilizador descarregar pdf (Página 12)

12 English

The machine produces dry ice pellets con-

sisting of liquid carbon dioxide. The size of

the dry ice pellets is selected via different

extruder plates.

The machine is only to be used in dry

rooms.

Do not spray the machine with water to

clean it. Wipe the machine housing using a

damp cloth.

The application may only be installed by

authorised technicians!

몇 Warning

The highest allowed net impedance at the

electrical connection point (refer to techni-

cal data) is not to be exceeded.

Liquid carbon dioxide streams into the cyl-

inder and hardens into dry ice snow by the

drop in pressure. This dry ice snow is com-

pacted by a hydraulic cylinder and pressed

through the extruder plate. This creates cy-

lindrical dry ice sticks, which breaks down

into pellets.

1 Indicator lamp "Voltage on"

2 Indicator lamp "Oil level low"

3 Indicator lamp "Oil temperature high"

4 Indicator lamp "Motor overload"

5 Indicator lamp "Cycle too long"

Refer to "Help with malfunctions/errors

with display".

6 Key "Piston forward"

The piston is manually moved into the

front position (prerequisite: key switch

at “M”).

7 Key "Piston backwards"

The piston is manually moved into the

rearmost position (prerequisite: key

switch at “M”).

8 Main switch

9 Oil pressure manometer

10 Steam pressure manometer

11 Key switch "Direct/PCS" (option)

12 Key "Start PCS" (option)

13 Rotary knob "Production time/volume

(option)

14 Set the key switch to "0/OFF" / "I/ON"

(option).

15 Weight indicator (option)

16 Switch cabinet lock

17 Key switch "M/0/A".

M: The piston can be moved manually

to perform service work.

0: The machine is turned off.

A: Pellet production.

18 Emergency-stop button

19 Operating hour counter

20 Key "Reset"

Resets the automatic operation inter-

ruption following a malfunction.

21 Key "On"

22 Key "Off"

The piston stroke is terminated; the pis-

ton will move to the front position and

machine will stop.

23 Pellet ejector

A Installation set volume control PCS (op-

tion)

B Installation set scale (option)

Proper use Function

Control elements

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 156 157

Comentários a estes Manuais

Sem comentários